Exterior Care
Dry Wash Polish
The Dry Wash Polish services can be performed inside a Hangar or outside during dry conditions. This is a complete waterless solution which can save up to 5000 liters of water for a Boeing 737. Moreover, the Dry Wash preserves the quality of the paint and can enhance its life with a minimum of 30%. After this treatment, the aircraft is clean, polished and protected against all kinds of dirt. This wash can be performed during maintenance since there is no water needed thus no spillage, this way the engineers can continue the work during the wash. Which minimalises ground time.
Semi-Dry Polish
An exterior Semi-Dry Wash is a wash performed in combination with water. However, we are still able to save at least 95% of water in comparison to a traditional wet wash. This service can be performed in humid conditions at any location on an airport, but also inside Hangars. Because there is no spillage on the ground we are able to wash outside without harming the environment. All the chemicals, dirt, pollution and hydraulic fluids are collected on our pads and cloths. This service can also be performed during an A-check and/or B-check, which minimalises ground time. Because we can wash a narrow aircraft within four hours the wash can also be performed during night stops.
Technical Wash
During a technical wash, the landing gear and wheel well are being cleaned. In Hangars we use a steam cleaning method, whilst cleaning on airside we can perform a landing gear wipe down.
If you have specific requirements and/or products we are open and flexibel to adapt our procedures.
أخبار
المهن